EGA Master

Log in

Home

PIN PUNCHES

TECHNICAL FILE

PIN PUNCHES



69958	2x8x100mm,3z8z150mm,4x8x150mm,5x10x150mm,6x10x150mm,8x12x150mm

PUNCHES

TECHNICAL FILE

PUNCHES



69955	A	Botador cónico / Taper punch: 2x10x125mm, Botador cónico / Taper punch: 3x10x125mm, Botador cónico / Taper punch: 4x10x125mm, Botador cónico / Taper punch: 5x10x125mm, Botador cónico / Taper punch: 5x10x125mm, Granete / Center punch: 4x8x115mm
69956	B	Botador cónico / Taper punch: 2x10x125mm, Botador cónico / Taper punch: 3x10x125mm, Botador cónico / Taper punch: 4x10x125mm, Botador cónico / Taper punch: 5x10x125mm, Botador cónico / Taper punch: 5x10x125mm, Granete / Center punch: 4x8x115mm

CHISELS AND PUNCHES

TECHNICAL FILE

CHISELS AND PUNCHES



69953	A	Cincel mecánico / Cold chisel: 12x11x100/15x14x125mm,Botador cilindrico/Pin punch 6x10x150/4x8x150,Botador cónico/Taper punch 3x10x120mm,Granete/Center punch 3x8x100mm
69954	B	Cincel mecánico / Cold chisel: 12x11x100/15x14x125mm, Buril plano/ Crosscut chisel: 5x14x125mm, Granete / Center punch: 3x8x100mm, Botador cilíndrico / Pin punch: 4x8x150mm, Botador cónico / Taper punch: 3x10x120mm

PIN PUNCHES

TECHNICAL FILE

PIN PUNCHES



69957	2x8x100mm,3z8z150mm,4x8x150mm,5x10x150mm,6x10x150mm,8x12x150mm

Start Previous

Next Last

Show

EGA Master - Logotipos de calidad

POLÍGONO INDUSTRIAL JÚNDIZ

C/ Zorrolleta 11 / 01015 Vitoria SPAIN - Aptdo. 5005

Tel. +34 945 290 001 / Fax. +34 945 290 141_

email

This document has been created by EGA Master S.A., and thus, owns its intellectual rights. Any total or partial copy or difusion, in any phisical, electronical or any other way of this document strictly forbidden, unless EGA Master S.A. provides a written authorization. Any infringment of these rights can be claimed judicially.