For bending a pipe there are many ways and one of them is to use a bending machine.


A bending machine perfectly suited to bending steel pipes for conveyance of water, gas, etc. ¼ "÷ 3" is the CURVAMATIC.

This machine has a two-speed system that allows rapid automatic approach and a smooth bending without changing piston. Prepared with double plate, which gives maximum consistency during bending.

VIDEO




 


Moreover, as discussed above, there are several norms steel pipe that must be met. It is therefore advisable not to "develope" a home made bender that does not have all these features.

For example, the CURVAMATIC is designed for bending pipes according to DIN-2440 NORM. Hereafter the diameter and thickness it can bend.

Working pressure: 13 Tm.



TABLE OF PIPE DIAMETERS DIN-2440

SIZE

OUTER DIAMETER

THICKNESS

1/4

13,5

2,35

3/8

17,2

2,35

1/2

21,3

2,65

3/4

26,9

2,65

1

33,7

3,25

1.1/4

42,4

3,25

1.1/2

48,3

3,65

2

60,3

3,65

2.1/2

76,1

3,65

3

88,9

4,03




RECOMMENDATIONS

1. Do not use loose clothes that could get grabbed into moving parts.
2. Always use gloves.
3. Always use original accessories to avoid injuries.
4. Do not handle or operate the machine from the front (pipe curving area). Always stand in the rear (hydraulic piston area).
5. Always place the front foot perfectly aligned with the hydraulic piston to ensure a safe use.