There are several ways and tricks to cut a pipe, but if we want a perfect finish and safe cutting without any effort, we recommend using the right tools to do it: tube cutter or hack saw. These tools are designed for this type of cutting by cutting quality.


Below are shown different types of cutter EGA Master brand:


This type of cutter can cut diameters from 1/8´´÷1. ¼´´and 1/8´´÷2´´
Can cut steel pipes and stainless steel.


This type of cutter can cut diameters from 1/8´´÷2´´ and 1´´÷ 3´´

Can cut steel pipes and stainless steel.



CORTATUBOS This type of cutter can cut diameters from 2´´÷ 4´´
Can cut steel pipes and stainless steel.
CORTATUBOS
HINGED PIPE CUTTER 
This cutter can cut pipe diameters bigger than those listed above.

In addition, this articulated hinged pipe cutter is a perfect tool for use where a minimal rotation is needed because of the lack of space. Ninety degree turn instead of 360 is enough to cut the tube.
Courts with diameters between:
- 2´´ ÷ 4´´
- 4´´ ÷ 6´´
- 6´´ ÷ 8´´
- 8´´ ÷ 12´´
Being able to cut steel pipes, stainless steel and ductile iron and function.




Hack saw:

To make 45 or 90 degree diagonal cuts in a pipe, it is advisable to use a hack saw. This tool has an easy to use and ensures those cuts rankings. Furthermore, it is very easy to use.
KRONOS

ARCO DE SIERRA


****Advices:

- Use the right tool for the job and do not abuse it.
- Keep the hack saw in good condition and clean.
- The saws are cutting tools and therefore must be handled with care.
- You should avoid to use worn out or abused saw blades because these can break and cause an accident.
- When the tube is almost cut, decrease the pressure on the blade.
- Cutting speed should be constant and not too fast.
- The saw blade can take two different positions: on the same plane perpendicular to the hack and has the plane.